-----Original Message-----
From: owner-bugtrack@dieboldes.com [mailto:owner-bugtrack@dieboldes.com]On Behalf Of Ken Clark
Sent: Tuesday, June 05, 2001 1:44 PM
To: bugtrack@dieboldes.com
Subject: RE: Burning PCMCIA cards with Laptop + Win 2000Okay, excellent report. Bonus points, does the same thing happen with pure 4.x R6 AVTS? That is, if you download multiple memory cards to R6 AVTS, then put a card not yet "unpacked" into another R6, does it wipe the card?Ken-----Original Message-----
From: owner-bugtrack@dieboldes.com [mailto:owner-bugtrack@dieboldes.com]On Behalf Of Mike Brown
Sent: Tuesday, June 05, 2001 11:47 AM
To: bugtrack@dieboldes.com
Subject: RE: Burning PCMCIA cards with Laptop + Win 2000Okidoke now here are the problems I have found.When I create a PCMCIA card on the NT, or Win 2000 machine and continue to load that card into the Ballot Station that I used to download the card, the election unpacks itself and works. If I pull the card when the Ballot station asks me "Do you want to Download another?" I move the card to either another Win 2000 machine or into an R6 unit, the unit asks me if I want to Download an election. At this point, the R6, or Win 2000 machine has deleted the Election that was on there.MikeMike Brown1611 Wilmeth Road,McKinney, T.X.75069PH: 972.542.6000FX: 972.542.6044-----Original Message-----
From: owner-bugtrack@dieboldes.com [mailto:owner-bugtrack@dieboldes.com]On Behalf Of Ken Clark
Sent: Tuesday, June 05, 2001 11:24 AM
To: bugtrack@dieboldes.com
Subject: RE: Burning PCMCIA cards with Laptop + Win 2000Does the PCMCIA card created on the NT load on 4.x ballot station running on NT? If so, zip the contents, and send it to me.Ken-----Original Message-----
From: owner-bugtrack@dieboldes.com [mailto:owner-bugtrack@dieboldes.com]On Behalf Of Mike Brown
Sent: Tuesday, June 05, 2001 9:07 AM
To: Bugtrack@Gesn. Com
Subject: Burning PCMCIA cards with Laptop + Win 2000If I burn a PCMCIA card with WinNT 4.0, I can remove the card, and place it in an R6 unit and the DB will load. Problem with this setup is, I can only burn 1 card, since the OS crashes after that. NT does not do well with hot swapping anything. When I attempt the same procedure with a windows 2000 machine, I can theoretically hot swap the PCMCIA card, if I make sure I wait the required 10-20 seconds for the machine to realize that I pulled the card, and it issue's me a dialog box that informs me of this. I then have to click the OK button to acknowledge to the system that I know I have removed the card, then I can insert a new blank card to continue burning my PCMCIA cards. That is all fine and dandy, but another problem arises, after burning the PCMCIA card, I them proceed casually over to the R6 unit, and insert the card, I then get the Download Election Dialog box, not the loading election. I have looked at the contents of the PCMCIA card, and have not seen any differences. The election will not load, and yes, I have tried this a few times with the same results.MikeMike Brown1611 Wilmeth Road,McKinney, T.X.75069PH: 972.542.6000FX: 972.542.6044