|
Steve:
Before we spin our wheels on this
one, could you please get the serial number of the unit for me. I can then
examine the assembly or repair documentation for that unit and determine what
has or has not been done to it.
Ian
----- Original Message -----
Sent: Wednesday, February 16, 2000 1:34
PM
Subject: RE: AVTS calibration
This could possibly be one of the machines that has not been
updated. When
the White & Blue AVTS units first came out there
was some problem
internally that caused the lower left hand corner to have
problems. Check
with Ian, he fixed the problem and should know if
this is really the
problem with your machine.
-----Original
Message-----
From: Steve Knecht [SMTP:skglobal@earthlink.net]
Sent:
Wednesday, February 16, 2000 10:45 AM
To: support@gesn.com
Subject: Re: AVTS
calibration
Should this have been reported as a
bug??
-----Original Message-----
From: Steve Knecht <skglobal@earthlink.net>
To: support@gesn.com <support@gesn.com>
Date: Monday, February 07, 2000 3:21 PM
Subject: AVTS
calibration
One of the touchscreen ballot
stations has a significant "distortion"
in the touchscreen
calibration. I've used the calibrate function and it
works well on
the top portion of the screen, but does not seem to correct
itself (I've
tried this routine a dozen times or so to see if I could
figure out a
pattern). The lower left corner has to be hit about 1/2 inch
above
the mark (measured using the edge of a voter card to be relatively
sure
about distance). The upper portion of the screen is correct in its
calibration. This makes it very difficult to use the PREVIOUS
function. Or
to find many of the admin functions in windows.
Comments??
<< File: ATT00000.htm >>
|